S1C17711 low power 16-bit single chip microcontroller low power mcu (operating voltage 1.8v, 1.0 ua / sleep, 2.0 ua / halt) built in flash memory (64k byte). 8.2mhz high-speed operation with 1.8v low voltage. built-in lcd driver: 56seg x 24com / 64com x 16com (with booster circuit for power supply voltage) analog i/f: 10bit a/d converter 3 (1.5) lsb, r/f converter has compact code optimized for c, and hi gh throughput of an in struction/clock. supports serial ice, and comes equipped with risc cpu core s1c17: ? descriptions the S1C17711 is a 16-bit mcu featuri ng high-speed low-power operations, compac t dimensions, wide address space, and on-chip ice. based on an s1c17 cpu core, this product consists of 64k bytes of flash memory, 4k bytes of ram, serial interface modules supporting sensors such as uart to support high-bit rate and irda1.0, spi, and i2c, various timers, 29 general input/output ports, maximum 56 s egment 24 common lcd driver and a pow er supply voltage booster circuit, a/d converter, r/f converter, supply voltage detector, and 32 khz and maximum 8.2 mhz oscillator circuits. it allows 8.2 mhz high-speed operation at a minimum of 1.8 v operating voltage, and executes a basic instruction in one clock cycle with 16-bit risc processing. the S1C17711 also includes a coprocessor supporting multiplication, division, and mac (multiply and accumulation) operations. the on-chip ice function allows onboard flash programmi ng/erasing, program debugging, and evaluations using the icdmini (s5u1c17001h) that can be c onnected with three signal wires. the S1C17711 is ideal for applications, such as remote cont rollers, health care products, and sports watches, that must be driven with battery power and require sensor interfaces and a high-definition lcd display. ? features cpu ? seiko epson original 16-bit risc cpu core s1c17 ? multiplier/divider (copro) - 16-bit 16-bit multiplier - 16-bit 16-bit + 32-bit multiply and accumulation unit - 16-bit 16-bit divider on-chip flash memory ? 64k byte s (for both instructions and data) ? 1,000 erase/program cycles (min.) ? read/program protection function ? allows on-board programming us ing a debugging tool such as icdmini (s5u1c17001h) and self-programming by software control. on-chip ram ? 4k bytes on-chip display ram ? 384 bytes clock generator ? three types of built-in oscillators (system clock sources) - iosc oscillator circuit 2.7 mhz (typ.) - osc3 oscillator circuit 8.2 mh z (max.) crystal or ceramic oscillator circuit supports an external clock input - osc1 oscillator circuit 32. 768 khz (typ.) crystal oscillator circuit ? core clock frequency control ? peripheral module clock supply control ? iosc control for quick-restart processing from sleep mode i/o ports ? max. 29 general-purpose i/o ports (pins are shared with the peripheral i/o.) serial interfaces ? spi 1 channel ? i2c master (i2cm) 1 channel ? i2c slave (i2cs) 1 channel ? uart (115200 bps, irda 1.0) 1 channel ? ir remote controller (remc) 1 channel timers ? 16-bit timer (t16) 4 channels ? 16-bit pwm timer (t16a) 4 channels ? clock timer (ct) 1 channel ? stopwatch timer (swt) 1 channel ? watchdog timer (wdt) 1 channel lcd driver ? 56 seg 24 com (1/4 bias) ? 64 seg 16 com (1/4 bias)
S1C17711 2 seiko epson corporation ? 64 seg 8 com (1/4 bias) ? built-in voltage booster a/d converter ? successive approximation type ? eight analog input channels (max.) ? 10-bit resolution r/f converter ? two channels, cr oscillation type ? 24-bit counter ? supports dc-bias resistive/capaciti ve sensors and ac-bias resistive sensors. ? supports external input for counting pulses. supply voltage detector (svd) ? 15 programmabl e detection levels (1.8 v to 3.2 v) interrupts ? reset ? nmi ? 23 programmable interrupts (eight levels) power supply voltage ? 1.8 v to 3.6 v (for normal operation) ? 2.7 v to 3.6 v (for flash erasing/programming) ? built-in voltage regulator (t wo operating voltages switchable) operating temperatur e ? -25c to 70c current consumption ? sleep state: 1.0 a typ. (osc1: off, iosc: off, osc3: off) ? halt state: 2.0 a typ. (osc1: 32 khz, iosc: off, osc3: off, pclk: off, lcd: off) 9.0 a typ. (osc1: 32 khz, iosc: off, osc3: off, pclk: off, lcd on (all on, maximum contrast, vc2 reference)) ? run state: 12 a typ. (osc1: 32 khz, iosc: off, osc3: off, pclk: on, lcd: off) 400 a typ. (osc1: off, iosc: off, os c3: 1 mhz ceramic, pclk: on, lcd: on (all on, maxi mum contrast, vc2 reference voltage)) shipping form ? tqfp15-128pin package (14 mm 14 mm, lead pitch: 0.4 mm) ? vfbga10h-144 package (10 mm 10 mm, ball pitch: 0.8 mm) ? die form (pad pitch: 90 m)
S1C17711 seiko epson corporation 3 ? block diagram core cpu s1c17 with coprocessor ram 4kbyte flash memory 64kbyte display ram 384byte test circuit reset circuit interrupt controller prescaler 16bit timer 4ch uart 1ch spi 1ch i 2 c master i 2 c slave i/o1(0x4000-) #test #reset sdam, sclm sin, sout, spiclk sin, sout sclk sdas, scls i/o2(0x5000-) power generator r/f converter a/d converter svd circuit lcd driver misc register oscillator/ clock generator clock timer stopwatch timer watchdog timer advanced timer 4ch remote controller i/o port i/o mux dclk, dst2, dsio vdd, vss, vd1, , vc1-4, ca-ce, avdd seg0-55 com0-23 or seg0-63 com0-15 osc1-2, osc3-4 fout tout/cap excl re mi, re mo pxx 32 bit 16 bit 8 bit 16 bit 16 bit
S1C17711 4 notice: no part of this material may be reproduced or duplicated in any fo rm or by any means without the written permission of seiko ep son. seiko epson reserves the right to make c hanges to this material without notice. se iko epson does not assume any liability of a ny kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, furt her, there is no representation that this material is app licable to products requiring high level reliab ility, such as, medical products. moreo ver, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that any thing made in accordance with this material will be free from any patent or copy right infringement of a third party. this material or portio ns thereof may contain technology or the subject relati ng to strategic products under the control of the foreign exchange and foreign trade la w of japan and may require an export license from the ministry of economy, trade and industry or other approval from another government ag ency. all brands or product names mentioned herein are trademarks and/ or registered trademarks of t heir respective companies. ? seiko epson corporation 2010, all rights reserved semiconductor operations division ic sales department ic international sales group 421-8 hino, hino-shi, tokyo 191-8501, japan phone: +81-42-587-5814 fax: +81-42-587-5117 http://www.epson.jp/device/semicon_e/ epson semiconductor website document code: 411828700 first issue march, 2010 in j apan
|
